Configuring The Tcp/Ip Settings; Figure 3-9 Tcp/Ip Configuration Page; Procedure 3-5 Configuring The Tcp/Ip Settings - American Dynamics VideoEdge User Manual

4-channel ip encoder

Hide thumbs Also See for VideoEdge:

Table of Contents

Web Configuration

Configuring the TCP/IP settings

The TCP/IP Network (Ethernet) configuration page allows the configuration of the following

TCP/IP Settings:

• Server Name

• IP Source

• IP Address

• IP Mask

• Gateway IP

• DNS IP

The TCP/IP page will also display the MAC address of the IP Encoder.

1 Ensure that the browser is displaying the Configuration page (if not refer to Procedure 3-3).

2 Select Edit from within the TCP/IP section.

The TCP/IP configuration page will be displayed, as shown in Figure 3-9.

3 The Server Name is the network name given to the IP Encoder on the TCP/IP network. The

default Server Name is the product name, e.g. ADIPE4-, followed by the last 6 digits of the

MAC address.

Enter a new Server Name by deleting the current name and typing a new Server Name.

4 Select the desired IP Source from the IP Source drop down list. The options are DHCP or

Manual. If DHCP is selected the remainder of the TCP/IP settings will be obtained from the

3-12

Installation and User Guide

Table of Contents