8 - 2
Symbol LS9208/LS9208i Product Reference Guide
Connecting to an IBM 468X/469X Host
The scanner connects directly to the host interface.
IBM Direct Connection
Connect the interface cable to the rear of the scanner, as described in
Connect the other end of the interface cable to the appropriate port on the host (typically, Port 9).
Scan the appropriate bar codes in this chapter to configure the scanner.
NOTE The only required configuration is the port number. The IBM system typically controls most other scanner
IBM Default Parameters
lists the defaults for IBM host parameters. To change any option, scan the appropriate bar code(s)
provided in the Parameter Descriptions section beginning on
miscellaneous default parameters.
IBM Host Default Table
IBM 468X/469X Host Parameters
Convert Unknown to Code 39
User selection is required to configure this interface and this is the most common selection.
Host Port Connector
Appendix A, Standard Default Parameters
Installing the Interface Cable on page
for all user preferences, hosts, symbologies, and