Text & Connect - HME NEXEO Instruction Manual

Text & Connect
Text & Connect allows you to use a computer or smart device to send messages to active NEXEO
headsets. The text message is sent via the HME CLOUD portal and converted to an audio message
when received by the targeted headset user(s).This feature must meet the following prerequisites:
The NEXEO base station must be online and registered.
The NEXEO base station must have a NEXEO or NEXEO | Pro Tier assignment (i.e., it's not
available for NEXEO | Core).
The NEXEO base station version must be 3.3.0 or higher (voice commands v3.1 or higher)..
Voice Commands must be enabled on the NEXEO base station. See Voice Commands under
System "Settings" on page 27.
The user role must have the "Send Text & Connect" permission enabled via the HME CLOUD.
1. Once Voice Commands have been enabled, "Text & Connect" will appear in the NAME column on
the Message Center>Messages page. See Fig. 8.8.
2. Tap the More icon and select Edit Message from the drop-down list (Fig. 8.9).
© 2024 HM Electronics, Inc. All rights reserved.
Fig. 8.8
Fig. 8.9
8
49