HME NEXEO Instruction Manual page 19

Once your headset is successfully paired, one of two dialog boxes appears. If there are no crew
profiles set up in the system, then Fig. 1.21 will appear. Tap the No, Skip button to continue as a guest
(this will open the "Select Your Position & Options dialog," see Fig. 1.23). Or, tap the Yes, Add New
Crew Profile button (this will open the Create Crew Profile dialog, see "Chapter 2 - Crew" on page
16 and Fig. 2.2).
If there is an existing Crew Profile, then the Select Your Name To Pair dialog opens (see Fig. 1.22).
Tap on your name if it already exists (names are listed in alphabetical order, so you may have to scroll
down the list to find it), or tap on the Continue as guest option in the upper left corner if you don't have
a profile.
Continue as guest
A B C D
A
Aaron
E
Eva
Paul
J
Jane
Doe
S
When the Select Your Position dialog appears (Fig. 1.23), you are prompted to select a position. Tap
on one of the available tiles to select it (DRIVE-THRU 1 is selected in Fig. 1.23). If you are selecting the
DRIVE-THRU position, you also have the option of Auto Hands-Free mode (the first checkbox located
below the position tiles). This allows you to connect with a new customer without having to connect
manually by tapping the headset keypad.
When you check this box, you are automatically connected with a customer when they arrive at the
order point. You are then automatically disconnected when they leave the order point. The headset
remains in this mode until the headset is powered off and on again. This feature is only available
© 2024 HM Electronics, Inc. All rights reserved.
Fig. 1.21
S e l e c t Yo u r N a m e To P a i r
Pair Headset Select Name
2
E F G H I J K L M N O P Q R
Major
Fig. 1.22
Select Position
3
S T U V W X Y Z
1
13