1. Manuals
  2. Brands
  3. HME Manuals
  4. Headsets
  5. NEXEO
  6. Instructions manual

HME NEXEO Instructions Manual

All-in-one headset
Hide thumbs Also See for NEXEO:
1
2
3
4
5
6

Advertisement

Table of Contents

Pairing Your NEXEO | HDX™ All-in-One Headset
The NEXEO | HDX Platform changes the way you interact with your crew, the headset, and your customers. More than
just a headset, the NEXEO | HDX Platform enables group conversation, provides an interactive Base Station display, and
delivers the latest generation of HDX audio.

How to Pair Your All-in-One Headset with the NEXEO Base Station

1.
Ensure you have a fully charged battery in your headset before starting the pairing process.
2.
Turn on your headset by pressing the blue button.
3.
Locate the Pairing Area on your All-in-One headset between the volume up and down buttons in the center of the touch panel.
4.
The Pairing Ring on your Base Station is located in the bottom right corner.
Note: When idle, the sensor ring illuminates with a solid blue ring.
1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEXEO and is the answer not in the manual?

Questions and answers

Related Manuals for HME NEXEO

Summary of Contents for HME NEXEO

  • Page 1 Pairing Your NEXEO | HDX™ All-in-One Headset The NEXEO | HDX Platform changes the way you interact with your crew, the headset, and your customers. More than just a headset, the NEXEO | HDX Platform enables group conversation, provides an interactive Base Station display, and delivers the latest generation of HDX audio.
  • Page 2 Bring the headset Pairing Area to the Pairing Ring. The solid blue ring turns into a swirling green ring, indicating that pairing is in process. Pairing is completed and successful when the swirling green ring turns solid green. Once the headset is paired, ensure you hold the headset by the outer edge to avoid unintentionally tapping the interface. 2 of 6...
  • Page 3 If pairing fails, the ring will turn red. Try again by holding the headset Pairing Area steadily, centered, and flush against the Pairing Ring. Note: Headset movement and distance may cause pairing errors. The Base Station will alert you if the battery is running low. 3 of 6...
  • Page 4 Selecting Your Position Once your headset is paired, the Select Your Position screen displays. Select the position your manager has assigned to you. DRIVE-THRU 1 allows your to hear Drive-Thru communication for Lane 1. DRIVE-THRU 2 allows your to hear Drive-Thru communication for Lane 2. CREW allows communication with everyone in the Crew Group and team members in the Drive-Thru Group.
  • Page 5 Auto Hands-Free Mode When selecting the Drive Thru 1 or Drive Thru 2 position, you may select Auto Hands-Free mode. Auto Hands-Free mode allows the order-taker freedom from pressing the lane button when a car arrives at the menu. Tap the checkbox to enable AUTO HANDS-FREE mode. When a car arrives at the menu, the headset automatically activates the lane button (1 and 2 on the headset interface).
  • Page 6 6 of 6 www.hme.com/training HME Training Portal Scan to Visit Find instructional videos, supporting documents, and other guides. © 2022 HM Electronics, Inc. The HME logo and product names are trademarks or registered trademarks of HM Electronics, Inc. All rights reserved. 3.17.22...

Table of Contents