Lane Volume - HME NEXEO Instruction Manual

Lane Volume

3
Fig. 3.2
What is this screen for? Tap on the LANE VOLUME tab. This screen allows you to set volume levels
for the speaker posts in your drive-thru. Individual controls can be used to adjust specific audio fea-
tures. Move the slider knob to the left or right to decrease or increase the volume, respectively.
CUSTOMER VOICE: This controls the inbound volume for the customer's voice from the speaker post
microphone at the drive-thru lane's order point.
ORDER TAKER VOICE: This controls the outbound volume for the Order Taker's voice going to the
speaker post at the drive-thru lane's order point.
ARRIVAL TONES: This controls the volume of the Arrival Tones when the customer arrives at the order
point/speaker post.
GREETER MESSAGE: This sets the volume for an order point greeter message if the Greeters message
is enabled. Greeter messages are enabled through the MESSAGE CENTER (AOT must be OFF to
enable Greeter messages).
19
© 2024 HM Electronics, Inc. All rights reserved.