Iv Bar; Stand-Still Tm Isolation Platform; Pure-Vu Tm Seals - Labconco Cell Logic+ B2 User Manual

IV Bar

The IV Bar can be field installed on any size Cell Logic+ B2 biosafety cabinet. The bar
allows for easy hanging of IV bags used inside the biosafety cabinet. Catalog numbers
are listed in Table 9-4 below.
TM
Stand-Still Isolation Platform
Required for supporting microscopes on Cell Logic+ models with Scope-Ready
package. The Stand-Still Isolation Platform promotes proper airflow through the cabinet
and underneath the microscope, and reduces vibrations threefold.
TM
Pure-VU Seals
Each Cell Logic+ with Scope-Ready package comes with two clear blank seals one
standard height seal (Catalog Number 4027800) and one XL height seal (Catalog
Number 4027810). The Punch Kit (4027801) is also included with each Cell Logic+ with
Scope-Ready package. Additional pre-punched seals are listed below:
Cabinet
Width (Feet)
4'
6'
Description
Stand-Still Platform,
12.0" x 18.75" (30.5 x 47.6 cm)
XL Stand-Still Platform,
14.0" x 22.75" (35.6 x 57.8 cm)
*Requires use of Pure-Vu XL Seal 4027810 or 4027811
Nominal Eyepiece Height
13.0" (33.0 cm)
14.0" (35.6 cm)
15.0" (38.1 cm)
16.0" (40.6 cm)
17.0" (43.2 cm)
16.0" +/- 2.0" (40.6 cm +/- 5.1 cm)*
*Pure-Vu XL Seal with pre-punched optics holes
Table 9-4
Catalog
Number
3858601
3858603
Table 9-5
Catalog
Number
4028200
4028100*
Table 9-6
Catalog
Number
4027813
4027814
4027815
4027816
4027817
4027811*
72