Setting The Clock - Labconco Cell Logic+ B2 User Manual

Setting the Clock

Figure 6-9
Select either 12 Hour (AM/PM) format or 24 Hour
format.
[OK/MUTE]
Figure 6-10
The selected field (Hours or Minutes) flashes, set the
current time using [UP] and [DOWN]. Hours will
flash first, once correct, use [OK/MUTE] to switch to
Minutes. Holding [UP] and [DOWN] in the Minutes
3 : 15
field will fast scroll.
Note: AM or PM will not show if 24 Hour format
selected.
46