Stand-Still Tm Isolation Platform; Temp-Zone Tm Package (Optional) - Labconco Cell Logic+ B2 User Manual

TM
Stand-Still Isolation Platform
The Stand-Still Isolation Platform supports the microscope on the cabinet's work surface
and removes up to 94% of vertical and horizontal vibrations. ASHRAE 110 and NSF 49
testing confirms this unique elevated, aerodynamic base ensures safe airflow.
Constructed of seamless Type 304 stainless steel, the isolation platform is non-porous,
easy to clean, and autoclavable. Important Note: Always remove the rubber isolation
feet prior to autoclaving. The 12 inch (305 mm) wide x 18.75 inch (476 mm) deep
platform accommodates most microscopes. See Section 9: Accessories for ordering an
extended Stand-Still XL Isolation Platform for use with microscope bases that extend
over the front of the lower work surface.
TM
Temp-Zone Package (optional)
Models with the Temp-Zone package option include a temperature-controlled area 10.5
inch (267 mm) wide x 12 inch (305 mm) deep. Note: the temperature-controlled are is 7
inch (178 mm) wide x 12 inch (305 mm) deep on 3 foot models. Samples heated in an
incubator or chilled in a refrigerator may be transferred to the Temp-Zone and kept at
optimum temperature. Quick connection fittings on the left side of the cabinet attach to
a user-supplied circulator that continually delivers heated or chilled water through
channels located underneath the Temp-Zone area of the work surace. Uniform
temperature distribution is maintained on the Temp-Zone area of the work surface.
41