Omron K3NP - 1998 Operation Manual page 72

Setting Mode
MODELS
SETTING
Follow the steps described below to set the comparative output pattern to level output.
EXAMPLE
1, 2, 3...
This setting is only available for the K3NP with the Comparative Output Unit.-
Set Value LED Display Model
1. Press the Mode Key for more than one second while the opt option menu is
displayed. The aUg process time for averaging measured value setting will
appear.
Set Value LED Display Model
2. Repeatedly press the Mode Key until the c-out comparative output pattern
setting is displayed.
Set Value LED Display Model
3. Press the Shift Key to display the prior setting nomal for changing. The
PROG indicator will flash.
Set Value LED Display Model
4. Press the Up Key twice to display leUel . The setting will be validated auto-
matically if no change is made for five seconds. The c-out comparative out-
put pattern setting will be displayed again.
Note Press the Mode Key to enter the setting immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model
When no operation is executed for five seconds
Set Value LED Display Model
Section 4-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
63