Sensor Type ( Ina , Inb ) - Omron K3NP - 1998 Operation Manual

Setting Mode
Sensor Type
ina
inb
FUNCTION
SETTING
SETTING
Follow the steps described below to set input A to 11 in operating mode f1 (passing
EXAMPLE
speed).
1, 2, 3...
52
· Specifies the type of sensors for input A and input B.
· The sensor type of input B cannot be selected if the operating mode of the
K3NP is set to f2 (cycle) or f4 (elapsed time).
· Open Collector Input
Sensor type
Transistor input
Relay input
Normally Open Model: The sensor output is OFF (open) when the sensor is
not sensing an object.
Normally Closed Model: The sensor output is ON (closed) when the sensor is
not sensing an object.
· Voltage Pulse Input
Sensor type
Transistor input
Set Value LED Display Model
1. Press the Mode Key for more than one second while the setup setup menu
is displayed. The func operating mode setting will appear.
Set Value LED Display Model
2. Press the Mode Key to display ina input A sensor type setting.
Set Value LED Display Model
3. Press the Shift Key to display 00 for changing. The PROG indicator will flash.
Set Value LED Display Model
Normally open Normally closed
00 01
10 11
Active high (H) Active low (L)
00 01
Basic Model
Basic Model
Basic Model
Basic Model
Section 4-2
Default
00
Default
00