Front of the Meter
Up Key
Shift Key
RESET/TEACH Key
Used to select a parameter to be displayed for setting value change.
Used to increment the current digit in the setting value by one.
The value increases in the following order:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Used to change the parameter displayed in setting mode.
Used to scroll the digit to the right of the presently displayed digit.
Used to reset the K3NP to its initial state or to reset the max./min. value in RUN
mode.
Used to select the teaching function. Refer to 6-1 Teaching Function for details.
Section 1-2
5