Time Unit ( Time ) - Omron K3NP - 1998 Operation Manual

Setting Mode
Time Unit
time
FUNCTION
SETTING
SETTING
Follow the steps described below to set sec second unit setting.
EXAMPLE
1, 2, 3...
54
The time unit can be selected to display the calculation results of F2 (cycle), F3
(time difference), and F4 (elapsed time).
Unit
0 to 99,999
scal
Displayed in seconds within a range
sec
between 0 and 99,999 s.
Displayed minutes within a range
min
between 0 and 99,999 min.
Displayed in minutes and seconds
mm.ss.d
(1/100 s) within a range between 00
min, 00 s 0 and 59 min, 59 s, 9.
Set Value LED Display Model
1. Press the Mode Key for more than one second while the setup setup menu
is displayed. The func operating mode setting will appear.
Set Value LED Display Model
2. Repeatedly press the Escape Key until time time unit setting is displayed.
Set Value LED Display Model
3. Press the Shift Key to display scal for changing. The PROG indicator will
flash.
Set Value LED Display Model
Display range
Basic Model
Basic Model
Basic Model
Basic Model
Section 4-2
Default
scal