Communications Unit Number ( U-No ); Baud Rate ( Bps ) - Omron K3NP - 1998 Operation Manual

Setting Mode
Communications Unit Number
u-no
Baud Rate
bps
FUNCTION
SETTING
MODELS
SETTING
Follow the steps described below to set the communications unit number to 15 and the
EXAMPLE
baud rate to 19,200 bps.
1, 2, 3...
56
· Set a communications unit number as an identification number by which the
host computer is connected to the K3NP.
· If more than one K3NP is connected in parallel, make sure that each commu-
nications unit number is unique.
· The baud rate should be set to the baud rate of the host computer.
· Communications Unit Number
Setting range
00 to 99
· Baud Rate
1200: 1,200 bps / 2400: 2,400 bps / 4800: 4,800 bps /
9600: 9,600 bps / 19200:19.2 Kbps / 38400: 38.4 Kbps
This setting is available for the K3NP with the Communications Output Board.
Set Value LED Display Model
1. Press the Mode Key for more than one second while the setup setup menu
is displayed. The func operating mode setting will appear.
Set Value LED Display Model
2. Repeatedly press the Mode Key until the u-no communications unit number
setting is displayed.
Set Value LED Display Model
Unit
--- 00
Setting range
Basic Model
Basic Model
Basic Model
Section 4-2
Default
Default
9600