Menu Overview - Omron K3NP - 1998 Operation Manual

Setting Mode

4-2-2 Menu Overview

RUN Mode
Refer to Section 5 Operations in RUN Mode.
Setting Mode
Setting value menu
Output Test
Refer to Section 6
Useful Functions.
Note
40
Press the Mode and Shift Keys
while turning the K3NP on.
Power On
Press the
Mode Key
for 1 second.
Press the Mode Key for 1 second.
Bank no. of set
value
1 to 4
HH setting value
H setting value
L setting value
LL setting value
1. When making new settings or changing settings of each parameter, press the
Shift Key to the setting state.
2. The K3NP stops measurement in setting mode.
Some menus cannot be set according to the Output Board selected.
If the operating mode is changed, all the other parameters will be set to default
values except communication setting and set values in protect mode. There-
fore, set the operating mode and sensor type.
Maintenance Mode
Refer to Section 6 Useful Functions.
Press the Escape and
Protect Mode
Up Keys for 1 second.
Refer to 4-3 Protect Mode.
Prescaling menu
Bank no. of pres-
cale
Prescaling value of input A
X (mantissa))
Prescaling value of input A
Y (exponent)
Decimal point
position
Section 4-2
Press the Mode Key for 1 second.