E Setting Examples - Omron K3NP - 1998 Operation Manual

In the following example, with the K3NP, passing speed (mm/s) on condition that there is a distance of 1 meter
between the sensors with transistor output, the prescaling bank is set to OFF, and the prescaling value is set to
1000 x 1/60 (i.e., approximately 16.6666).
Power On
RUN mode
Press the Mode
Key for 1 second.
Set value menu
Note 1. If the operating mode setting is changed, all the other parameters are set to default values except those
for the communications and settings in protect mode. Therefore, set the operating mode first.
2. The displayed setting will be validated automatically if no change is made for five seconds and the next
parameter will be displayed.
Appendix E
Setting Examples
Setup menu
Prescaling menu
Prescaling menu
Set with the
Operating mode
Up Key.
Set with Shift
and Up Keys
Set with Shift
and Up Keys
Set with the
Up Key.
Set with Shift
and Up Keys
Set with Shift
and Up Keys
Set with the
Up Key.
Option menu
Output test
Set value menu
113