Omron K3NP - 1998 Operation Manual page 56

Setting Mode
2. Press the Shift Key to display off for changing. The PROG indicator will
flash.
Set Value LED Display Model
3. Press the Up Key to change the prescaling bank setting. The input will be
validated automatically if no change is made for five seconds. The p.bank
prescaling bank setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The ps.ax
prescaling value X (mantissa) of input A setting will be displayed for
setting the next parameter.
Set Value LED Display Model
4. Press the Mode Key to display the ps.ax prescaling value X (mantissa) of
input A setting.
Set Value LED Display Model
5. Press the Shift Key to display the set value 1.0000 for changing. The PROG
indicator will flash.
Set Value LED Display Model
6. Press the Up and Shift Keys to set the value to 0.5000 . The input will be vali-
dated automatically if no change is made for five seconds. The ps.ax pres-
caling value X (mantissa) of input A setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The ps.ax
prescaling value X (mantissa) of input A setting will be displayed for
setting the next parameter.
Set Value LED Display Model
7. Press the Mode Key to display the ps.ay prescaling value Y of input A set-
ting.
Set Value LED Display Model
Section 4-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
47