How to Care for and Store the Unit
Clean the main unit with a soft dry cloth. If the main unit
is heavily stained, wipe it with a cloth lightly dampened
with water or detergent, then wipe it dry with a dry cloth.
Be careful so that no water gets inside the main unit.
Do not wipe the unit with benzene, gasoline, paint
thinner, alcohol, or other volatile detergrents.
Error display
Electrodes were not
firmly grasped.
Measurement posture
or grip was not stable.
Hands are dry.
The values of body fat
percentage and BMI are
outside the measurable range.
Abnormal operation
Error Displays
Cause
15
What to do (the next button to push)
Grasp the grips correctly and measure.
(Refer to Pages 12 and 13.) (Start button)
Measure without moving your arms.
(Refer to Pages 12 and 13.) (Start button)
Slightly moisten hands with a wet
towel, then measure.
(Refer to Page 21.) (Start button)
Check the set height, weight, age,
and gender again.
(Refer to Pages 10 and 11.) (Set button)
Turn on the On/Off button again and
start measurement. If this error still
occurs again, consult OMRON
customer service, ( 1-800-634-4350).