Omron CP1E - INTRODUCTION Introduction Manual page 83

• Creating a line from bottom to top:
Hold down the [Ctrl] key and press the up arrow key.
• Creating a line from top to bottom:
Hold down the [Ctrl] key and press the down arrow key.
Note Repeating the process over an existing connection line will delete it.
Copying/Pasting Contacts/Instructions/Rungs
Contacts/Instructions
1.
Place the cursor on a contact or an instruction.
2.
Hold down the [Ctrl] key and press the [C] key.
The selected contact or instruction will be copied to the clipboard.
3.
Move the cursor to where you wish to paste. Hold down the [Ctrl] key and
press the [V] key.
The contact or instruction on the clipboard will be pasted.
Rungs
1.
Click the rung header of the rung you wish to copy.
The whole rung will be selected.
2.
Hold down the [Ctrl] key and press the [C] key.
The selected rung will be copied to the clipboard.
3.
Move the cursor to the rung where you wish to paste. Hold down the [Ctrl]
key and press the [V] key.
The rung on the clipboard will be pasted.
4-7 Editing Programs
SYSMAC CP1L/CP1E Introduction Manual
4
4
81