Omron CP1E - INTRODUCTION Introduction Manual page 178

A-5 Comparison between CP1L and CP1E
Connection with Programming Devices
Item
CX-Programmer
Connecting tool
CX-Simulator
Utility
Programming Device
connection port
Applicable Support Software
A
Interchangeability with CXP files
of CP1L
Program Read protection
protection from the CX-
Programmer
Enabling and
disabling
overwriting
programs from
the CX-
Programmer
FINS write
protection for
CPU Unit via
Network
Enabling and
disabling writing
program files for
file memory
PLC backup tool
CPS files
Changing the PV refreshing
format (BCD or binary) for
timers/counters
Changing timer PVs
Others
PT
SAP
Ladder monitor
PT programming
console
Trouble shoot
Daikansan
FINS
176
SYSMAC CP1L/CP1E Introduction Manual
CP1L CPU Units
CX-Programmer
Provided.
-
USB port
Optional serial
communication board
CX-Programmer version 7.1
or higher
-
Supported.
Protection can be set by
task.
Supported.
Supported.
Supported.
Supported.
Supported.
Need to set.
Possible.
Supported.
Supported.
Supported.
Supported.
Supported.
Supported.
CP1E E-type CPU Units
CX-Programmer for CP1E
CX-Programmer
Provided.
Switch Box
Error simulator
USB port only
CX-Programmer for CP1E version 1.0 or higher
CX-Programmer version 8.2 or higher
CX-Programmer for CP1E file extension is "CXE".
CX-Programmer for CP1E cannot open a CXP file. But CXP
files of CP1L can be copied and then pasted into the CX-
Programmer for CP1E.
CXE files can be processed with CX-Programmer.
Supported.
It is the protection for the whole program.
Read protection cannot be set by task.
Not supported.
Not supported.
Not supported.
Not supported.
Not supported.
Not need to set.
Impossible.
Changing during online editing.
Not supported.
Not supported.
Not supported.
Not supported.
Not supported.
Supported.
A part of FINS are not supported.
Refer to CP1E CPU Unit Software User's Manual.
CP1E N-type CPU Units
USB port only