Omron CP1E - INTRODUCTION Introduction Manual page 129

4.
On the IN0 (CP1E: IN4) drop-down list for Interrupt Input, select [Quick].
While the sensor input contact is 0.04, setup is performed for [IN0 (CP1E:
IN4)] since the interrupt input / quick-response input setting is set to
0(CP1E: 4).
5.
Close the PLC Settings dialog box.
6.
To apply changes made to the PLC settings, turn the PLC power ON.
Programming Example
Ladder Program
Sensor input
Counter reset input
0.04
0.01
C0000
A-4 CP1L Programming Examples
CNT
BCD counter
0000
#0100
100.00
Count complete
SYSMAC CP1L/CP1E Introduction Manual
A
127