The Ddr3X40 And Ddr3X64 Tabs - Intel Cyclone V GT FPGA Development Kit User Manual

6. Board Test System
792833 | 2024.02.21
6.3.4.3. Write
Writes the flash memory on your board. To update the flash memory contents:
• Type in values in the memory table cells.
• Press Enter, and click Write.
The application writes the new values to flash memory and then reads the values back
to guarantee that the memory table accurately reflects the memory contents.
6.3.4.4. CFI Query
Updates the memory table with the CFI ROM table contents from the flash memory.
6.3.4.5. Reset
Starts the flash device's reset command and updates the memory table displayed on
the Flash tab.
6.3.4.6. Erase
Clears the
6.3.4.7. Flash Memory Table and Flash Memory Map
The control starting with the Address column allows you to write data in each cell.
The control underneath is read-only and displays the board's flash memory map.

6.3.5. The DDR3x40 and DDR3x64 Tabs

The DDR3x40 and DDR3x64 tabs allow you to read and write the DDR3 memory on
your board. The following figure shows the DDR3x40 tab.
Send Feedback
block of flash memory.
Unused
®
Cyclone V GT FPGA Development Kit User Guide
29