Safety Cautions - Intel Cyclone V GT FPGA Development Kit User Manual

Power Cord Requirements
The plug on the power cord must be a grounding-type male plug designed for use in
your region. It must have certification marks showing certification by an agency in
your region. The connector that plugs into the appliance inlet of the power supply
must be an IEC 320, sheet C13, female connector. If the power cord supplied with the
system does not meet requirements for use in your region, discard the cord, and do
not use it with adapters. Use only certified power supply cord with appropriate gauge,
designed for use in your region.
Lightning/Electrical Storm
Do not connect/disconnect any cables or perform installation/maintenance of this
product during an electrical storm.
Risk of Fire
To reduce the risk of fire, keep all flammable materials a safe distance away from the
boards and power supply. You must configure the development kit on a flame
retardant surface.
B.1.2. Safety Cautions
Thermal and Mechanical Injury
Certain components such as heat sinks, power regulators, and processors may be hot.
Heatsink fans are not guarded. Power supply fan may be accessible through guard.
Care should be taken to avoid contact with these components.
®
Cyclone V GT FPGA Development Kit User Guide
48
B. Additional Information
792833 | 2024.02.21
Send Feedback