Installing Optional Components; Connecting A Remote Epo Switch - Huawei UPS5000-H-800 kVA-NTN Quick Manual

UPS5000-H-800 kVA-NTN
Quick Guide (480 V, 100 kVA Power Modules)
Figure 1-69 Installing the mounting plates
Step 5 Install mounting plates at the front and rear of the top frame of the inductor
cabinet.
Figure 1-70 Installing the mounting plates
----End

1.11 Installing Optional Components

1.11.1 Connecting a Remote EPO Switch

● Prepare the EPO switch and cable before installation. The recommended cable
● Equip the EPO switch with a protective cover to prevent misoperations, and
● Triggering EPO will shut down the rectifier, inverter, charger, and static bypass,
Issue 01 (2023-03-20)
NO TICE
2
size is 0.3 mm .
protect the cable with a protective tube.
but will not disconnect the UPS mains input. To power off the UPS completely,
turn off the upstream input switch when you trigger EPO.
Copyright © Huawei Technologies Co., Ltd.
1 Installation and Cable Connection
61