Table of Contents
Advertisement
UPS5000-H-800 kVA-NTN
Quick Guide (480 V, 100 kVA Power Modules)
2.1.5 Starting the Inverter
UPS System User List
Default User
admin (administrator)
operator (common user)
Starting the Inverter on the LCD
Step 1 Choose Common Functions > Inv. ON.
Step 2 On the displayed login screen, select a user name and enter the password.
Step 3 In the displayed dialog box, tap Yes to start the inverter.
----End
Starting the Inverter on the WebUI
Step 1 Open a browser (Internet Explorer 11 as an example) and choose Tools > Internet
Options.
Step 2 Click the Advanced tab, check that Use TLS 1.2 and Use TLS 1.3 are selected, and
click OK.
Step 3 In the address box of the browser, enter https://
Step 4 Enter the correct user name and password and click Login.
Step 5 On the WebUI, choose Monitoring > UPS System > Running Control, and click
Inv. ON, and confirm the operation to start the inverter.
----End
Issue 01 (2023-03-20)
NO TE
Change the password after your first login to prevent unauthorized access. You can choose
System Info > Settings > User Settings and change Password.
NO TE
You can also start the inverter by choosing System Info > Maintenance > Inv. ON.
NO TE
If the power module receives a startup command when it cannot be started, the startup
command will be retained for 1 minute. Within 1 minute, if there is no situation (for
example, the power module encounters other faults, executes a shutdown command, or a
fault is rectified) that requires the startup command to be cleared and the power module
becomes able to start, then the power module responds to the startup command.
Copyright © Huawei Technologies Co., Ltd.
Preset Password
LCD
WEB
LCD
WEB
UPS IP address .
2 Single UPS Commissioning
000001
Changeme
000001
Changeme
88
Advertisement
Table of Contents
