Installing A Top Enclosure Frame - Huawei UPS5000-H-800 kVA-NTN Quick Manual

UPS5000-H-800 kVA-NTN
Quick Guide (480 V, 100 kVA Power Modules)
● Do not bind signal cables and power cables together.
● RS485 cables and FE cables must be shielded cables.
● The cable connection between the UPS and the SmartLi is used as an example
Figure 1-65 Installing a signal cable between the UPS and the SmartLi
(1) Monitoring interface unit in the master SmartLi cabinet
----End

1.10 Installing a Top Enclosure Frame

If cables are routed in and out from the bottom, install a top enclosure frame.
Procedure
Step 1 Remove the connecting kits from both sides of the cabinet top.
Issue 01 (2023-03-20)
NO TICE
in the figure.
Copyright © Huawei Technologies Co., Ltd.
1 Installation and Cable Connection
59