Setting The Peak Shaving Mode - Huawei UPS5000-H-800 kVA-NTN Quick Manual

Table of Contents

UPS5000-H-800 kVA-NTN

Quick Guide (480 V, 100 kVA Power Modules)

----End

2.1.4.3 Setting the Peak Shaving Mode

Prerequisites

●

Context

The peak shaving mode is used to reduce the use of mains power during peak

hours of the power grid or to reduce the OPEX. Peak shaving is implemented by

UPS source sharing between mains and batteries. During peak hours, the batteries

provide the preset output power, and the mains supplies the remaining part of

power to reduce the consumption of mains power. During off-peak hours, the

mains charges the batteries to reduce costs.

Procedure

Step 1 Choose System Info. > Settings > Peak Shaving on the LCD or Monitoring > UPS

System > Running Parameter > Peak Shaving on the WebUI, and set the

following parameters.

Issue 01 (2023-03-20)

Figure 2-9 Inverter hibernation 2

The peak shaving mode is supported only when the UPS works in normal

mode and SmartLi batteries (lithium batteries developed by Huawei) are

connected.

Before the system switches from normal mode to peak shaving mode, the

SOC value of lithium batteries must reach 100%.

The system is working in normal mode.

2 Single UPS Commissioning

Table of Contents