Installing A Dry Contact Extended Card - Huawei UPS5000-H-800 kVA-NTN Quick Manual

UPS5000-H-800 kVA-NTN
Quick Guide (480 V, 100 kVA Power Modules)
Figure 1-73 Securing the fastener
Step 2 Install the T/H sensor on the fastener.
Figure 1-74 Installing an ambient T/H sensor
Step 3 Connect the RJ11 port on the ambient T/H sensor to the COM1 port on the
monitoring interface card.
Figure 1-75 Connecting cables
(1) Cascaded with other T/H sensors
----End

1.11.3 Installing a Dry Contact Extended Card

Step 1 Install a dry contact extended card.
●
Issue 01 (2023-03-20)
If a dry contact extended card is configured
Copyright © Huawei Technologies Co., Ltd.
1 Installation and Cable Connection
63