Bottom Cable Routing + Rear Air Exhaust Configuration - Huawei UPS5000-H-800 kVA-NTN Quick Manual

UPS5000-H-800 kVA-NTN
Quick Guide (480 V, 100 kVA Power Modules)
Figure 1-13 Hole positions on the channel steel
(1) Channel steel
Step 5 Secure the cabinet to the channel steel.
Step 6 Install anchor baffle plates around the cabinet.
----End

1.6.2 Bottom Cable Routing + Rear Air Exhaust Configuration

Installation on the Floor
● Ensure that the floor is level.
● The customer needs to purchase the expansion bolts used for securing the
Step 1 Determine the cabinet installation position on the floor based on the mounting
holes in the marking-off template.
Issue 01 (2023-03-20)
NO TE
● In this example, one cabinet is installed not against a wall on C-channel steel with the
openings facing downwards.
● The channel steel model, installation mode, whether holes need to be drilled on a side,
hole size, and the number of cabinets are subject to the site survey data.
NO TICE
cabinet.
Copyright © Huawei Technologies Co., Ltd.
1 Installation and Cable Connection
(2) Hole positions on the channel steel
22