Table of Contents
Advertisement
6.3
WI-FI PROGRAMMING
The XL Mobile supports programming via Wi-Fi.
configuring Wi-Fi.
To enable Wi-Fi programming mode on the radio:
1. Press and hold the menu button while powering on the radio.
2. The WIFI INSTALL ACTIVE screen is displayed (Figure 6-1).
DISCONNECTED if not connected to a wireless network or CONNECTED if connected to a
wireless network.
6.4
EDIT CHANNEL (ANALOG AND P25 CONVENTIONAL ONLY)
Channels can be edited from the Channel Information (CH INFO) menu display. Most of the
displayed channel parameters can be modified here. Channel edits persist across a power cycle.
Loading a personality clears any channel edits. Available parameters vary depending on whether
the channel is a P25 or analog channel.
To edit a channel:
1. From the main display, press to access the CH INFO screen.
2. Press the up or down navigation buttons to scroll through the programmed channel settings.
3. Press the EDIT soft key.
4. Enter the password programmed via RPM2. You do not have to re-enter the password until
you power cycle the radio.
Figure 6-1: Wi-Fi Install Active
Only authorized users should attempt channel editing.
14221-1850-2000, Rev. C
Refer to Appendix A for information on
The radio displays
99
Advertisement
Table of Contents
