L3Harris XL Series Operator's Manual page 38

14221-1850-2000, Rev. C
MENUS
UTILITY MENU:
AUDIO SETTINGS:
• MASTER
• SPEAKER
• NOISE CANCELLATION
• TONES
• KEYPAD TONES
DISPLAY SETTINGS:
• COLOR SCHEME
• FRONT BACKLIGHT
• FRONT BRIGHTNESS
• FRONT TIMEOUT
• FRONT DISPLAY OFF
• ACCENT BACKLIGHT
• ACCENT BRIGHTNESS
• ACCENT TIMEOUT
• DAY/NIGHT
• LEDs
38
Allows the user to enable or disable the master volume control. When
enabled, it allows remote control heads to control the volume of the speaker
attached to the back of the radio. When disabled, the volume knob on a
remote-mount control head only controls the volume of the speaker attached
to the control head.
Mute or unmute the speaker audio.
Enable or disable Noise Cancellation. See Section 4.16.
Enable or disable radio side tones.
Enable or disable tones that sound when the radio's keypad buttons are
pressed.
Press the Group/Channel Select Knob to toggle the front and top display's
COLOR SCHEME for optimum visibility in day or night conditions (NORMAL
or INVERTED).
Press the Group/Channel Select Knob to toggle the front display
backlighting between ON/OFF/MOMENTARY/MOMENTARY (OFF).
Press the left or right navigation buttons to dim or brighten the display.
When the FRONT BACKLIGHT setting is MOMENTARY, this value specifies
how long the radio needs to be inactive before the front display's backlight
turns off. Press the left or right navigation buttons to change the time in 0.5
second increments.
Turns the front display off completely. Press the Group/Channel Select Knob
to turn the front display back on.
Allows the radio user to change the backlight for the buttons on the XL mobile
control head or KMM.
ON – Backlight always on
•
OFF – Backlight always off
•
MOMENTARY – Backlight will come on at the beginning of the user
•
interaction and stay on, for the number of seconds determined by the
Top/Accent Backlight Timeout control, after the last user interaction.
Allows the user to change the level of brightness of the buttons on the
control head or KMM. Using the arrows, set the brightness level from 0 to
10.
This control allows the user to determine how long the Accent Backlight will
stay lit after the last user interaction. Enter a number from .5 to 30 in
seconds.
Toggles between the Day and Night display modes.
• Day – When this option is selected, LCD, LED, and keypad backlight
brightness is set for Day mode.
Night – When this option is selected, LCD, LED, and keypad backlight
•
brightness is set for Night mode.
Auto – If this option is selected, the LCD, LED, and keypad backlight
•
brightness varies dynamically based on input at the light sensor on the
control head.
Toggle indicator LEDs ON or OFF.
DESCRIPTION