14221-1850-2000, Rev. C
A.4 CONFIGURE THE RPM2 APPLICATION
To ensure that RPM2 can discover radios over Wi-Fi, ensure that the Enable Wi-Fi checkbox is
checked on the RPM2 Preferences screen as shown in Figure 11-4. This checkbox is unchecked
by default.
Figure 11-4: Enable Wi-Fi in RPM2
Also, as shown in Figure 11-4, the Service Name must be updated to reference the value in the
active personalities for the radios you need to discover. See #3 in Section A.3 and Section A.8.2
for more information.
For default operation using the network as described in Section A.2, no other configuration of the
radio or RPM2 is required.
119