Faults/Alerts; Tone Encode - L3Harris XL Series Operator's Manual

5.17 FAULTS/ALERTS

is displayed on the main display when there is a fault.
To view and clear faults/alerts:
1. Press the Menu button.
2. Navigate to the MESSAGES menu.
3. Scroll up or down to highlight FAULTS/ALERTS and press the Group/Channel Select Knob
4. Fault messages are displayed. Press the up or down navigation buttons to highlight the
desired fault. Press the OPTIONS soft key to delete faults. Press the DETAILS soft key to
view details for the highlighted fault.
Possible faults include:
EEPROM FAULT - Contact L3Harris.
•
RF FAULT - Contact L3Harris.
•
ACCESSORY FAULT - Check antenna and antenna connection. Try replacing antenna.
•
INVALID SYSTEM - Feature not installed.
•
CHANNEL FAULT - Channel frequency programmed is not valid for this radio.
•
5. If you view but do not delete the fault, the alert icon goes away on the main display.
Contact L3Harris for assistance with diagnosing a fault.

5.18 TONE ENCODE

Tone Encode is a generic tone encoding scheme for call identification when transmitting on a
conventional system. It supports generic user-definable tone encode (up to 15 tones), Type 99
(up to 2 tones) and 5/1 Tone (up to 5 tones) encoding formats.
Tone encoding schemes are used to transmit calls to one or more target radios that have been
programmed with the correct tone decode sequence. When the receiving radio detects its tone
decode sequence, it unmutes on the call.
To select a Tone Encode option:
1. Press the Menu button.
2. Navigate to the CALL menu.
14221-1850-2000, Rev. C
89