Introduction; Description - L3Harris XL Series Operator's Manual

3.

INTRODUCTION

3.1

DESCRIPTION

The XL Series Mobile Radio provides the advanced connectivity that first responders require while
addressing evolving voice and data communications. It meets MIL-STD-810G for durability. XL
Mobile Radios support P25 Trunking, P25 Conventional, EDACS
BeOn operation over an LTE or Wi-Fi network. BeOn operation over LTE requires the LTE
®
Upgrade Kit.
NOTE
In the Australia/New Zealand market, WLAN operation within the 5150-5250 MHz
and 5250-5350 MHz WLAN bands must be disabled in any installation that is not
indoors. To accomplish this, configure the radio for 2.4 GHz channels in its Wireless
LAN Configuration (under Access Point Settings in RPM2, select Channel Type
– Auto). If frequencies are required in the 5 GHz Band, enter them in the manual
menu after verifying selections are compliant with local regulations for the
application in which the device is being used. Refer to the RPM2 online help for
more information.
The XL Mobile is a P25 converged, multiband Land Mobile Radio with an option to include LTE
capability. The XL-200M is a full-spectrum multiband mobile radio, supporting the UHF, VHF, 700
MHz, 800 MHz, and 900 MHz frequency bands. The XL-185M supports the same frequency
bands but can only perform as a single-band radio. Designed for anyone who needs to
communicate with multiple agencies or across multiple bands, the XL Mobile delivers mission-
critical connectivity.
For options and accessories, refer to Section 3.4. Additional accessories may have been added
since publication of this manual; refer to the Products and Services Catalog or contact L3Harris
for more information.
The XL Mobile installation includes a control head and the Vehicle Communications Hub (VCH),
which are described in the following sections.
BeOn operation over Wi-Fi requires CCM software R03A or later software.
14221-1850-2000, Rev. C
® , analog conventional, and
21