Gps Settings - L3Harris XL Series Operator's Manual

14221-1850-2000, Rev. C
5.8

GPS SETTINGS

NOTE
To access GPS settings:
1. Press the Menu button.
2. Navigate to the UTILITY menu.
3. Highlight GPS and press the Group/Channel Select Knob.
4. Scroll up or down to highlight desired menu selections and press the Group/Channel Select
Knob to change settings:
GPS - Enable or disable internal GPS.
•
POSITION INFO - See Section 5.9.
•
LINEAR UNITS - Set unit of measurement of displayed linear units: STATUTE, METRIC,
•
or NAUTICAL.
ANGULAR UNITS - Set unit of measurement of displayed angular units: CARDINAL,
•
DEGREES, or MILS.
POSITION FORMAT - Set format of displayed position information: Latitude/Longitude
•
Decimal Degrees (LAT LONG DD), Latitude/Longitude Degrees Minutes Seconds
(LAT/LONG DMS), LAT/LONG DM, Military Grid Reference System (MGRS), or
Universal Transverse Mercator (UTM).
SA OVER NETWORK - Allows the radio user to send GPS data to a L3Harris-supplied
•
PC client.
5. Press the BACK soft key to exit the menu.
74
The GPS SETTINGS menu item only appears if enabled using RPM2 and the
feature is installed.