Table 4-1: Radio Controls, Indicators, And Connectors - L3Harris XL Series Operator's Manual

Bluetooth is not supported in a configuration that ONLY utilizes the XL RHHC (no
control head).
NOTE

Table 4-1: Radio Controls, Indicators, and Connectors

CONTROL/INDICATOR
Power On/Off
Volume Control
Group/Channel
Selection
Menu Selection
Microphone Connector
Emergency Button
Navigation Pad
[Left, Right, Up, Down,
and Select (KMM)]
12-Button Alpha-
Numeric Keypad (KMM)
Menu Button
USB Connector
User-Programmable
Soft Keys
and
Programmable Buttons
Turn knob clockwise to power on the radio and increase volume.
Turn counterclockwise to decrease volume and put the radio into standby.
Minimum volume levels can be programmed into the radio to prevent missed calls
due to a low volume setting.
Rotate to select the available groups or channels.
•
While on the main display, press this knob to show the programmable button
•
function labels. Press again to hide labels.
Within a menu, rotate to scroll up or down through available menu selections.
•
Within a menu, press this knob to select the currently highlighted menu item,
•
like an Enter button.
Connection for hand-held microphones.
Press to declare an emergency. An Emergency Key Delay can be programmed
in the radio. This delay defines the length of time the emergency button must be
held before an emergency transmission is sent.
Navigates menu items.
In addition:
• Press the left navigation button while on the main display to access Channel
Information.
Press the down navigation button while on the main display to display the
•
functions assigned to programmable buttons and to Ext I/O In.
Press the up navigation button to display Missed Call info.
•
Press the right navigation button to end or reject an I-Call.
•
The Select button on the KMM selects the currently highlighted menu item,
•
like an Enter button.
By default, used to enter text or numbers. Can be programmed for various functions
(see Section 6.6).
From the Main Display, press this button to access the menu. Depending on
radio programming, pressing this button accesses the top-level list of menus or
accesses the Call Menu directly. While in a menu, press this button to return to
the main display.
Connection for USB accessory (e.g., Programming Cable).
Programmable, dynamic keys. See Section 6.6 for the functions that can be
programmed. Press the Group/Channel Selection Knob to display the function
labels for each button.
14221-1850-2000, Rev. C
FUNCTION
29