Radio Status - L3Harris XL Series Operator's Manual

5. From the OPTIONS menu, select LOCK SITE or SWITCH SITE.

5.14 RADIO STATUS

The status feature allows the radio user to send a status condition to the site without making a
voice call. There can be up to ten (10) status conditions programmed into the radio. For each
status defined, there is an ID and an alphanumeric name. The ID is sent to the site and the
alphanumeric name appears on the radio display when the ID corresponds with the information
programmed at the site.
NOTE
To send a radio status:
1. Press the Menu button.
2. Navigate to the MESSAGES menu.
3. Highlight RADIO STATUS and press the Group/Channel Select Knob.
4. Scroll up or down to highlight the desired message and press the Group/Channel Select Knob.
A button on the control head or KMM can be programmed to send a radio status
(see Section 6.6).
14221-1850-2000, Rev. C
85