Enable/Disable Type 99; Disable After Ptt; Auto Reset; Call Alert (Page) - L3Harris XL Series Operator's Manual

14221-1850-2000, Rev. C
4.20.1

Enable/Disable Type 99

To enable Type 99:
1. Select T99 TOGGLE from the CALL menu.
2. Press the Group/Channel Knob to change T99 TOGGLE between ENABLED and
DISABLED. T99 is displayed in the top of the radio display when Type 99 is enabled.
Or
A button or switch can be programmed to enable/disable Type 99 (see Section 6.6).
4.20.2

Disable After PTT

If this option is programmed using RPM2, Type 99
PTT. This allows the radio user to monitor traffic on the channel (after a PTT action) without
pressing the monitor button.
Can be used in conjunction with the "Auto Reset" option (see Section 4.20.3) to disable Type 99
after a PTT and automatically reset, or enable, Type 99 after 30 seconds.
4.20.3

Auto Reset

If this option is programmed using RPM2, Type 99 is automatically reset, or turned back on, after
30 seconds. Can be used in conjunction with the "Disable After PTT" option (see Section 4.20.2)
to disable Type 99 after a PTT and automatically reset, or enable, Type 99 after 30 seconds.

4.21 CALL ALERT (PAGE)

4.21.1

Send Alert

To send an alert:
1. Press the Menu button.
2. Navigate to the CALL menu.
3. Scroll up or down to highlight CALL ALERT and press the Group/Channel Select Knob.
54
is disabled after the radio user activates the