Channel Guard (Analog Conventional Only) - L3Harris XL Series Operator's Manual

4.18 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY)

Channel Guard is L3Harris's trademark for CTCSS (tone squelch) and CDCSS (digital tone
squelch).
NOTE
To select the Channel Guard tone:
1. Press the Menu button.
2. Navigate to the CALL menu.
3. Scroll up or down to highlight CHANNEL GUARD and press the Group/Channel Select Knob.
4. Highlight RECEIVE GUARD or TRANSMIT GUARD and press the Group/Channel Select
Knob.
5. Select the desired option from the list and select using the Group/Channel Select Knob.
The Channel Info screen and Channel Edit screen will change depending on this selection. See
Sections 5.5 and 6.3 for more information.
NOTE
The Channel Guard menu is only accessible if the System is setup for CG SEL
in the radio's personality.
A button on the control head or KMM can be programmed for Channel Guard
Override (see Section 6.6).
14221-1850-2000, Rev. C
51