Select Language; Set Up Scan; Default, Priority 1, And Priority 2 Channels - L3Harris XL Series Operator's Manual

14221-1850-2000, Rev. C

5.12 SELECT LANGUAGE

To change the language displayed by the radio:
1. Press the Menu button.
2. Navigate to the UTILITY menu.
3. Highlight CHANGE LANGUAGE and press the Group/Channel Select Knob.
4. Highlight the desired language and press the Group/Channel Select Knob.

5.13 SET UP SCAN

The procedures in the following sections describe how to set up the scan list, home channels,
and priority channels.
NOTE
5.13.1

Default, Priority 1, and Priority 2 Channels

5.13.1.1 Default Channel
This is the currently selected channel and is the channel you transmit on by default when you
press PTT while the radio is actively scanning and is not responding to a just received call.
Responding to a call the radio just received while scanning is called hang time. If hang time is set
to 0 using RPM2, the radio always transmits on the default channel in scan.
5.13.1.2 Priority 1 Channel
This channel will be scanned more often than other channels in the list and will be scanned in
between every other channel in the scan list. An example scan sequence would be P1 (priority
1), C2, P1, C3, P1, C4, etc. In addition, the priority channel will be scanned even while actively
receiving on a non-priority channel. For example, if the radio is actively receiving on C3 and
activity is detected on P1, the radio will drop C3 and switch to P1.
78
When using Preemptive Priority Scan, the frequencies in the list need to be
unique.