Edit Scan List; Set Or Remove Priority 1 And Priority 2 Channels - L3Harris XL Series Operator's Manual

14221-1850-2000, Rev. C
5.13.4

Edit Scan List

Depending on the scan list options selected via RPM2, you may be able to add or remove
channels/groups from the scan list.
To edit the scan list:
1. Press the Menu button.
2. Navigate to the SCAN menu.
3. Highlight SCAN LISTS and press the Group/Channel Select Knob.
4. Scroll up or down to highlight the scan list and press the Group/Channel Select Knob.
5. Scroll up or down to highlight channel/group.
6. Select OPTIONS.
7. Select ADD CHAN/DELETE CHAN, SET PRI1, SET PRI2, REMOVE PRI, or
NUISANCE/ADD BACK.
When a channel is not grayed out in the list, DELETE CHAN appears. When a channel/group
is grayed out (not in list), ADD CHAN appears.
8. Press the Group/Channel Select Knob to toggle selection.
5.13.5

Set or Remove Priority 1 and Priority 2 Channels

Priority channels are scanned more often than non-priority channels. Note that P1 and P2 can
only be set if configured as "Keypad" and the scan list is not set to "Fixed" using RPM2.
To set or remove priority 1 and priority 2 channels:
1. Press the Menu button.
2. Navigate to the SCAN menu.
80