L3Harris XL Series Operator's Manual page 103

FUNCTION
Monitor/Clear
Noise Cancellation
Enable/Disable
Numeric Channel Entry
OTAR Rekey
Phone Call
Profile Toggle
Priority Talk Group
Nuisance Delete
Scan Enable/Disable
Secure/Clear Enable
Toggle
Select Channel/Group
Bank
Selected Profile Toggle
Send Message
Send Status
Site Alias
Site Roaming Toggle
Speaker Mute Toggle
Stealth Mode
System Down
System Down Wrap
System Up
System Up Wrap
Talkaround/Repeater
Toggle
TX Power High/Low
View SA Display
Zone Down
Zone Down Wrap
Zone Up
Zone Up Wrap
Temporarily turn off selected squelch to monitor for traffic that may not normally break
squelch. Also, press this button followed by the emergency button to clear an
emergency.
Turns Noise Cancellation On/Off.
Allows the radio user to manually enter the group/channel number (see Section 4.11).
Initiate an OTAR rekey. See Section 5.19.7.
Initiate a telephone interconnect call. See Section 4.22.
Toggles between the currently active profile (if one has been selected) and no profile.
Assigns Priority Talk Group functionality in trunked systems. Assigns the button to
UNASSIGNED and plays boop tone in Conventional systems.
Performs a Nuisance Delete. See Section 4.27 for more information.
Enable/disable scan.
Toggles Encryption Mode On/Off. See Sections 4.17 and 5.19 for information on
Encryption.
Select the channel/group bank. If your system has more than 64 channels, this allows
you to select a channel group with channels 65 to 127, 128 to 191, etc.
Toggles between the currently active profile (if one has been selected) and no profile.
Sends a preconfigured message. See Section 5.15 for more information.
Sends a preconfigured status. See Section 5.14 for more information.
Accesses the Site Alias list. See Section 5.13.8 for more information.
Enable/disable Site roaming. Site Roaming allows the radio to roam to another site.
Toggles Speaker Muted/Unmuted.
Enable/disable Stealth Mode. See Section 5.21 for more information.
Scrolls down through the list of available systems, stopping when the end of the list is
reached.
Scrolls down through the list of available systems, wrapping to the top when the
bottom of the list is reached.
Scrolls up through the list of available systems, stopping at the top of the list.
Scrolls up through the list of available systems, wrapping to the end when the
beginning of the list is reached.
Toggles talkaround On/Off. See Section 4.19.
Toggle TX Power between LOW and HIGH.
Displays the Situational Awareness (SA) screen.
Scrolls down through the list of available mixed system zones, stopping when the end
of the list is reached. If no mixed system zones are defined, or there is only one, the
user will hear a deny tone when the button is pressed.
Scrolls down through the list of available mixed system zones, wrapping to the top
when the bottom of the list is reached. If no mixed system zones are defined, or there
is only one, the user will hear a deny tone when the button is pressed.
Scrolls up through the list of available mixed system zones, stopping at the top of the
list. If no mixed system zones are defined, or there is only one, the user will hear a
deny tone when the button is pressed.
Scrolls up through the list of available mixed system zones, wrapping to the end when
the beginning of the list is reached. If no mixed system zones are defined, or there is
only one, the user will hear a deny tone when the button is pressed.
14221-1850-2000, Rev. C
DESCRIPTION
103