Table of Contents
Advertisement
14221-1850-2000, Rev. C
4.10 SELECT ZONE/SYSTEM
A System is a group of channels or talkgroups that share a common set of parameters as
programmed using RPM2. For example, a Trunking system defines the parameters needed to
communicate on an infrastructure by agency or geographical region, such as WACN, System ID,
Talkgroups, etc. A conventional system defines the channel set used and any specific signaling
attributes.
A Zone is an OPTIONAL container that can hold channels or talkgroups from a variety of systems.
In other words, each member of a Zone belongs to an underlying system. Zones are always listed
first in the Zone/System menu and are designated by the
or KMM can be programmed to scroll through available zones/systems (see Section 6.6).
NOTE
Or
To select a zone/system via the menu:
1. Press the Menu button.
2. Navigate to the ZONE menu. The currently selected zone/system will be highlighted. A
personality can have up to 512 systems and up to 250 Zones.
3. Scroll up or down to highlight the desired zone/system. Hold the up or down buttons to scroll
repetitively; the menu will wrap to allow quick access to a zone/system,
4. Press the VIEW ZONE soft key to view channels in the zone/system or select the desired
zone/system using the Group/Channel Select Knob.
42
If enabled via radio programming, systems are not displayed in the ZONE menu,
only zones are displayed.
icon. A button on the control head
Advertisement
Table of Contents
