User Profiles - L3Harris XL Series Operator's Manual

3. The radio rings and indicates a missed call if you do not respond. The ring sounds until you
press PTT, view the missed call menu using the up navigation key, change
channel/group/system, or power cycle the radio.
4. The radio can store up to ten (10) missed call entries. Select one of these entries to call the
unit back or press the DISMISS soft key to clear the entry.

4.15 USER PROFILES

XL-series radios support User Profiles. A User Profile is a grouping of preset configurations that
allow the user to change radio operation based on the current activity/scenario. For example, the
radio can be programmed with profiles named Noisy, Fire, etc., and the radio user can switch
profiles on the radio depending on the environment they are entering. User Profile selection
persists across system/group changes and power cycles.
programmed to the radio. When you activate a new personality, the selected Profile changes to
None.
A "Covert" Profile is installed on the radio by default. This profile cannot be modified or deleted.
The following attributes apply when the Covert profile is active:
• The speaker is enabled.
All tones are disabled.
•
Keypad tones are disabled.
•
• The backlight is disabled.
• The indicator LED is disabled.
All other attributes remain at their current value.
•
When enabling a Profile, the radio adjusts all the appropriate settings to that of the Profile
selected. When disabling the Profile, the radio returns to the "None" Profile, which is the
personality settings, not what has been modified by the user. You can enable/disable a Profile
as needed; you cannot change between two different User Defined profiles.
14221-1850-2000, Rev. C
Up to ten (10) profiles can be
47