Use Talkaround To Bypass Repeater (Analog And P25 Conventional Only) - L3Harris XL Series Operator's Manual

14221-1850-2000, Rev. C
4.19 USE TALKAROUND TO BYPASS REPEATER (ANALOG AND P25
CONVENTIONAL ONLY)
You can bypass the repeater system to communicate directly with other radios on your current
channel's receive frequency. This is useful if you are out of range of a repeater or if a repeater is
busy. You must be in range of the other radio.
NOTE
To enable talkaround:
1. Press the Menu button.
2. Navigate to the CALL menu.
3. Scroll up or down to highlight TALKAROUND MODE.
4. Press the Group/Channel Knob to toggle TALKAROUND MODE to ENABLED.
5. The optional talkaround icon
talkaround mode is disabled via the CALL menu. Power cycling the radio does not disable
talkaround.
52
Talkaround can be enabled/disabled on a per-channel basis. When talkaround
is disabled, the icon is shown on the front and top display. If talkaround is
disabled for a channel (via the RPM2 personality), and the user tries to enable
talkaround via the menus or knobs while on that channel, the radio emits a
"boop" deny tone. Additionally, if talkaround is disabled on a channel, the
talkaround programmable button becomes inoperable and the radio boops.
appears. Calls are made on the receive frequency until