Wide Area System Scan (P25 Trunked) - L3Harris XL Series Operator's Manual

5. Select ADD SCAN LIST.
6. Highlight the newly added scan list and press the VIEW/EDIT soft key and then select EDIT
SCAN LIST.
7. Scroll left or right to display the desired system.
8. Scroll up or down to highlight the desired group/channel and the OPTIONS softkey. From the
options menu, you can add/delete channels from the scan list and set/remove Priority 1 and
Priority 2 channels.
When a custom scan list is selected, that list is scanned any time scanning is
enabled for any Trunked, conventional, or P25 Conventional system. To scan
only the channels assigned to a system, custom scanning must be turned off.
NOTE
5.13.7

Wide Area System Scan (P25 Trunked)

Wide Area System Scan (WASCAN) causes the radio to roam across mobile systems when the
currently selected system's control channel is lost. The radio will scan the control channels of
other systems.
To enable/disable Wide Area System Scan:
1. Press the Menu button.
2. Navigate to the SCAN menu.
14221-1850-2000, Rev. C
83