Programmable Icons; Data Only Configuration - L3Harris XL Series Operator's Manual

Table of Contents

Advertisement

14221-1850-2000, Rev. C
6.7

PROGRAMMABLE ICONS

The display has space for up to 16 configurable icons, which can be programmed to display any
of the following. Refer to Table 4-2.
Blank
Alerts
Bluetooth
Conventional Site Registration
Data Traffic
Emergency
Encrypted Traffic
Failsoft
Global Encryption
GPS
LTE Signal Status
Monitor
Noise Cancellation
6.8

DATA ONLY CONFIGURATION

The XL Mobile Radio supports data only operation without a control head. When configured for
data only operation, the radio cannot transmit or receive voice calls.
Set the following in RPM2 to configure the XL Mobile Radio for data only operation. Refer to the
RPM2 User's Manual, 14221-1100-2060, as necessary.
1. From the Personality Rail, navigate to OPTIONS  Data  Data Interfaces:
a. Check MDT Data Enable.
b. Check No Control Head - Data Only.
104
OTAR
PTT Disabled
Received Mail
Signal Strength
Speaker Mute
Talkaround
Tones Disabled
Transmit Disabled
Transmit Power
Type 99
VDOC
Wi-Fi
Wi-Fi AP
None

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-200mXl-185m

Table of Contents