L3Harris XL Series Operator's Manual page 122

14221-1850-2000, Rev. C
If the radio was not discovered in RPM2 but an IP address is displayed on the radio screen as
seen in Figure 11-5, this may mean that the Multicast (mDNS) messages are not making it through
the Access Point. Consult the Access Point's manual and make sure that those messages are
not being filtered out.
A.8.2 Grouping Radios by Service Name
Using a unique Service Name is allows the user to create logical groupings of radios to reduce
the number of radios discovered in RPM2 and helps reduce the overhead of keeping track of
which radios have been configured.
For example, if there are 100 radios in Wi-Fi programming mode (see Section A.5) with the same
Service Name, all 100 radios are displayed in the Radio tab after discovery has been completed.
This makes it difficult to select and program multiple radios simultaneously. However, if the
Service Name in the active personality on 16 of the radios are set to something unique like "fire1"
and the RPM2 application Service Name (see Section A.4) is also updated to "fire1," only those
radios with a Service Name of "fire1" are discovered and displayed in the Radio tab.
122