Table of Contents
Advertisement
MENUS
BLUETOOTH:
• ENABLED (YES/NO)
• DISCOVERABLE (YES/NO)
• VOLUME CONTROL (YES/NO)
• BLUETOOTH SPEAKER
• EXTERNAL SPEAKER
• PAIRING MGMT
CLOCK SETTINGS:
• TIME FORMAT
• TIME ZONE
GPS SETTINGS:
• GPS (ENABLED/DISABLED)
• POSITION INFO
• ANGULAR UNITS
• LINEAR UNITS
• POSITION FORMAT
• SITUATION AWARENESS
NETWORKING
PROGRAM:
• ACTIVATE PLAN
• PROFILES
MAINTENANCE:
• RADIO INFO
• TESTS
• PH2 LC DISPLAY
• DISPLAY RSSI
• TCXO TUNING
• FEATURE INFO
WIFI CLIENT:
• POWER ON
• ADD NEW
Enable/disable Bluetooth. See Section 5.10 for more information.
Put the radio into discoverable mode. When the user sets discoverable to
Yes, the radio becomes visible to Bluetooth-enabled devices, and allows the
user to initiate Pairing.
Select whether the radio volume control adjusts the output volume of the
Bluetooth speaker.
Mute the Bluetooth speaker. If the external speaker is present but muted and
mute is selected for the Bluetooth speaker, the external speaker will be
unmuted.
Mute the external speaker. If the Bluetooth speaker is paired, connected, but
muted and the external speaker is muted, the Bluetooth speaker will be
unmuted.
Access pairing management menu to view, add, or delete Bluetooth devices.
See Section 5.10 for more information.
Select 12 Hour, 24 Hour, 12 Hour w/ Date Toggle, or 24 Hour w/Date Toggle
display format.
Set time zone relative to Universal Time Coordinated (UTC).
Enable/disable GPS.
Displays GPS, Latitude, Longitude, and Altitude information. From this menu,
click NEXT to access SA INFO (see Section 5.2).
Set unit of measurement of displayed angular units: CARDINAL, DEGREES,
or MILS.
Set unit of measurement of displayed linear units: STATUTE, METRIC, or
NAUTICAL.
Set format of displayed position information: Latitude/Longitude Decimal
Degrees (LAT LONG DD), Latitude/Longitude Degrees Minutes Seconds
(LAT/LONG DMS), LAT/LONG DM, Military Grid Reference System (MGRS),
or Universal Transverse Mercator (UTM).
When enabled, the radio sends GPS data to a L3Harris-supplied PC client
using Remote Network Driver Interface Specification (RNDIS) networking.
View/Activate a personality. See Section 5.1.
Change current profile. See Section 4.15.
Displays radio information, i.e., ESN, software revisions, and firmware
revisions.
Allows service personnel to run radio tests.
For field service use only.
When enabled, RSSI is displayed on the RSSI screen and in the bottom of
the main display. -130 dBm is displayed when there is no received signal.
For field service personnel only. Improper adjustment will result in loss of
communications.
Displays what features are enabled on your radio.
Displays the list of available Wi-Fi clients and the status of Wi-Fi Connection
(a question mark indicates the Wi-Fi network is in the process of connecting;
a check mark indicates the Wi-Fi Network is connected).
Turn Wi-Fi on/off.
Displays the list of Trusted Wi-Fi Networks and is populated when Wi-Fi is
powered on. You can view, add, modify, and remove a Wi-Fi Network.
14221-1850-2000, Rev. C
DESCRIPTION
39
Advertisement
Table of Contents
