Predefined Menu Layouts; Table 4-4: Predefined Menu Layouts - L3Harris XL Series Operator's Manual

Table of Contents

Advertisement

MESSAGE
RX EMERGENCY
WIDE AREA SCAN
INVALID TALKGROUP
INVALID UNIT
REGISTERING
CTRL CHANNEL SCAN
BAND SCANNING
MISSED CALL
OTAR REKEY
COMPLETE
IGNITION OFF
4.7

PREDEFINED MENU LAYOUTS

Depending on radio programming, some menu options described in this manual may not be
available. The radio supports three predefined menu layouts: Full, Custom, and Restricted. Table
4-4 details what is available in each layout:
NOTE
CALL:
EXIT EMERGENCY
TALKAROUND
INDIVIDUAL CALL
CHANGE TALKGROUP
PHONE CALL
DIRECT DIAL
CALL ALERT/PAGE
CHANNEL GUARD
RECEIVE CG
TRANSMIT CG
AUDIO PLAYBACK
TONE ENCODE
T99
EMERGENCY TIMER
An emergency call is being received. The radio displays the unit name or unit ID.
P25 Trunked and EDACS – The radio has entered the Wide Area Scan mode to search for a new
system.
P25 Trunked and EDACS – The current talkgroup is not valid for the current system. This could
happen if the site denies registration due to an unrecognized talkgroup ID.
P25 Trunked and EDACS – The current unit is not valid for the current system.
P25 Trunked only – Displayed when the radio is performing a registration/affiliation on a P25
trunking site.
P25 Trunked and EDACS – The control channel is lost and the radio has entered the Control
Channel Scan mode to search for the control channel (usually out of range indication).
P25 Trunked – Only displayed if the system is configured for "EnhancedCC" mode of operation.
When the radio cannot find a Control Channel in either the trunked frequency set or the list of
discovered adjacencies, the radio can perform a full spectrum frequency scan to find a new Control
Channel.
P25 Modes and EDACS – Another user has tried to call or page this radio. The user can view who
the caller was by pressing the up navigation button.
OTAR Rekey operation completed successfully.
The radio has detected the ignition switch/key is off and the Ignition Shut-Off Timer is active. When
the Ignition Shut-Off Timer expires, the radio will power off. See Section 4.33 for more information.
The Custom predefined menu layout allows the administrator to customize the
list of menu items that are available to the radio user. Table 4-4 lists the default
settings. See Section 4.8 for a description of menus.

Table 4-4: Predefined Menu Layouts

MENU
DESCRIPTION
FULL
(DEFAULT SETTINGS)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
14221-1850-2000, Rev. C
CUSTOM
RESTRICTED
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-200mXl-185m

Table of Contents